EchoPilot USBA Pinout
EchoPilot USB3 SuperSpeed Breakout Board Pinout¶
EchoPilot Carrier Board Connector (J1)¶
This connector is used along with the provided cable to connect to J24 or J29 on the Carrier Board. It provides standard USB-A SuperSpeed connectivity to peripherals.
Connector: J1, Part Number: SM10B-SRSS-TB(LF)(SN)
Mating Connector: SHR-10V-S-B
Pin Number | Direction | Voltage | Pin Description |
---|---|---|---|
PIN 1 | Pwr | GND | GND |
PIN 2 | Pwr | +5V | USBSS Tx+ |
PIN 3 | O | +3.3V | USBSS Tx- |
PIN 4 | O | +3.3V | GND |
PIN 5 | O | +3.3V | USBSS Rx+ |
PIN 6 | O | +3.3V | USBSS Rx- |
PIN 7 | O | +3.3V | GND |
PIN 8 | O | +3.3V | USB D+ |
PIN 9 | O | +3.3V | USB D- |
PIN 10 | O | +3.3V | Vbus |
USB-A Connector¶
USB-A SuperSpeed downstream devices are supported with a current draw of up to 1.0A. Supports USB 3.1 SuperSpeed Devices. The standard carrier board utilizes a TUSB8042 hub. Note that 1uF capacitors are placed on the Tx+ and Tx- lines on the carrier board near the connector.
STEP File Download¶
EchoPilot AI USB3 A Breakout Board 3D model (STEP) File Download (right click, save link as)